All beds come as standard with a High Quality Qflex Mattress.
The Helston Carers mobiity bed is an ideal Carers bed for someone looking stay close to their partner. This bed has separate motors to profile the bed at the head-end or the foot-end, and again separate motors to vertically raise the bed up to 18 inches from the starting position (standard height; 23 inches). Our new Carers mobiltiy bed can be raised flat for the carers to wash or turn the patient, or it can be used to help the person stand out of the bed like a riser recliner chair (must be sat on the edge (in the middle section) of the bed), or it can be raised whilst adjusted at the head and foot-end to get a comfortable high position to look out of the window.
The single vertical lifting frame can be put into any of our adjustable bed surrounds, so choose the bed you like (from the home page) and add the vertical lifting frame (in the mechanisms tab drop down), this will add the cost of the mechanism to any bed, or choose the combination as shown on this page.
Bed height Breakdown
Standard size for the Helston Carers Bed is 23.5 inches from the floor to the top of the mattress.
Purchasing any Sprung Mattress (Pocket or Superior) may increase the overall bed height.
To make sure the height of your bed is correct when ordering, please measure your own first. We are able to alter your bed to a height of your choice, and all for an extra £75!
The length of the carers' mobility bed is 6ft 8". The standard length can be adjusted.
Altering the length means altering the mattress, mattress cover, mechanism and surround
Single bed length alteration £275*
Single bed length alteration for a vertical lifting mechanism £370*
Double bed length alteration £375*
Double bed length alteration for a vertical lifting mechanism £420*
Dual bed length alteration £445*
Dual bed length alteration for a vertical lifting mechanim £470*
Altering the height of bed £ 75*
* Special order
• 5 part adjustable profiling with integral raise and lower facility
• 4 motors (2 for profiling and 2 for lift)
• Vertical rise up to 18 inches from starting point
• Twin On-Line fittings
• Weight adjuster zone lumber section
• Centre belt
• Load bearing points bolted and sleeved
Dual beds have independent controls and independant matttresses. You will generally have a vertical lifting mechanism on one side of a dual carers' mobility bed, so if you are purchasing a 5ft dual bed you will only need one 2ft 6 vertical lifting mechanism.