This bed has been specifically designed for a person who requires carers.

The design allows for a person to be turned in bed at a comfortable height. It also assists the person to stand up from a seated position on the edge of the bed, in much the same way as a rise and recline chair works. Only the middle (flat) section can be used for this process whilst the bed is in its profiled position.

The mechanism can be raised up to 18 inches from the starting height. It can be raised flat for turning the patient or profiled as shown in the picture above (head and/or foot elevated.

This frame can be installed into any of our adjustable bed surrounds (Excludes Chatsworth and Sandringham).

Altering the length means altering the mattress, mattress cover, mechanism and surround

Available in 2ft 6 & 3ft and 4ft

The single vertical lifting frame can be put into any of our adjustable bed surrounds, so choose the bed you like (from the all adjustable beds page) and add the cost of the single vertical lifting frame (in the mechanisms drop down box on any bed product page ), or simply choose the combination as shown on this page..

Cost Breakdown (example)

Bed Cost                       £799.00
Head & Footboard       £199.00 (optional)
Mechanism                   £795.00

Total                               £1793.00

This bed comes without the underbed cut outs shown in the image, which are used in order to have access for a hoist. If these are required, please add this via the dropdown option above.

Dual beds have independent controls and independent matttresses. You will generally have a vertical lifting mechanism on one side of a dual bed, so if you are purchasing a 5ft dual bed you will only need one 2ft 6 vertical lifting mechanism.

Double beds have one mattresses, two vertical lifting mechanisms and a special linking cable.